Create a gorgeously flattering line from the first stroke with our Magnetic Liner Duo. Our intensely pigmented liquid liner glides smoothly on your lash line and delivers an effortlessly dramatic look. Coupling the liquid liner, our magnetic gel liner locks your lash and lets you flaunt a bold statement.
- Intense pigmentation
- Smooth and long-lasting coverage
STEP 1
Take out OpulenceMD Beauty brush with both angled edge and finer edge for more precision.
STEP 2Use angled Edge and give the liner a little stir so that the consistency becomes creamy like.
STEP 3Apply the first coat of liner from the inner eye to the outer eye or vice versa. There is no dry time with the gel magnetic liner.
STEP 4Apply a second coat similar to the first coat of gel magnetic liner. Keep the line really tight in towards the base of my lashes so that my magnetic lashes will have the best fit.
STEP 5Apply coat number three
STEP 6If lashes have a strong attraction to the eyelid then you have enough coats of liner. If lashes do not have that immediate attraction, apply one more coat making it four coats of liner.
STEP 7Take lash out of the case directly off the magnetic strip.
STEP 8Attach lashes so the shorter lashes are closest to the inner eye or nose.
STEP 9Grab lashes by the hair so the magnets on the lash band are exposed.
STEP 10Flex lash band a little so it has a slight curvature similar to the eyelid
STEP 11Apply to eyelid. Lash and lash band should click right into place with the magnetic liner.
Apply With Liquid Magnetic Liner:
STEP 1
Take the brush out of the handle and take off any excess liquid liner.
STEP 2Apply the first coat of liquid liner.
STEP 3Allow 30 to 45 seconds of dry time after the first coat. You'll notice a color change where it goes from an inky black to more of a matte black.
STEP 4Apply the second coat of liquid liner.
STEP 5Allow 30 to 45 seconds of dry time after the second coat. You'll notice a color change where it goes from an inky black to more of a matte black.
STEP 6Apply the third and final coat.
STEP 7Gently take the lash off the magnetic strip in the case.
STEP 8Flex the lash band so that the curvature matches the curvature of the eyelid.
STEP 9Hold the lash gently by the hairs on the lash.
STEP 10Put lash on!
Step 1
Avoid pulling on the hairs of the Lash
Step 2Go towards the outer corner of the lash locating the lash band
Step 3Loosen the corner of the lash band
Step 4Lift the lash by grabbing that first magnet pulling on the band
Step 5Remove the remainder of the Lash from the adhesion by pulling the eye lash band along the rest of the eye.
Cleaning The Lash Before Storing:
Items Needed:
Eyelid Cleaning Wand
Pristine Eyelid Cleaning System Cleanser
Step 1
Wet the Eyelid Cleaning Wand with the Pristine Eyelid Cleaning System Cleanser.
Step 2Use the wet Eyelid Cleaning Wand to gently go across each magnet on the lash to loosen up the magnetic liner.
Step 3If there is still magnetic liner on the magnets use the closed mouth side of a pair of tweezers and gently rub off any remaining liner.
Storing Lashes:
Step 1
After lashes have been taken off, use our sanitizer on your lashes.
Step 2Once sanitizer is on lashes, leave them in the case open for about an hour or two.
Step 3Place lash into the case so that the magnets on the lash attach to the magnetic lining inside the case.
Step 4The storage container is more than a beautiful classy container it protects your lashes from getting wet, dusty, dirty and also from getting accidentally crushed so that you get the maximum lifetime out of your lashes.
Cleaning Off Mascara (Optional):
Step 1
Your Opulence MD Beauty lashes will never need to be washed.
Step 2If you wear mascara with your natural Lashes and eyelash extensions in order to get a better blend, you can simply use an empty mascara spoolie to comb through your lash to remove any residual mascara that may have been left.
