How to Apply Lashes
Apply With Gel Magnetic Liner:
Take out OpulenceMD Beauty brush with both angled edge and finer edge for more precision.
Use angled Edge and give the liner a little stir so that the consistency becomes creamy like.
Apply the first coat of liner from the inner eye to the outer eye or vice versa. There is no dry time with the gel magnetic liner.
Apply a second coat similar to the first coat of gel magnetic liner. Keep the line really tight in towards the base of my lashes so that my magnetic lashes will have the best fit.
Apply coat number three
If lashes have a strong attraction to the eyelid then you have enough coats of liner. If lashes do not have that immediate attraction, apply one more coat making it four coats of liner.
Take lash out of the case directly off the magnetic strip.
Attach lashes so the shorter lashes are closest to the inner eye or nose.
Grab lashes by the hair so the magnets on the lash band are exposed.
Flex lash band a little so it has a slight curvature similar to the eyelid
Apply to eyelid. Lash and lash band should click right into place with the magnetic liner.
Apply With Liquid Magnetic Liner:
Take the brush out of the handle and take off any excess liquid liner.
Apply the first coat of liquid liner.
Allow 30 to 45 seconds of dry time after the first coat. You'll notice a color change where it goes from an inky black to more of a matte black.
Apply the second coat of liquid liner.
Allow 30 to 45 seconds of dry time after the second coat. You'll notice a color change where it goes from an inky black to more of a matte black.
Apply the third and final coat.
Gently take the lash off the magnetic strip in the case.
Flex the lash band so that the curvature matches the curvature of the eyelid.
Hold the lash gently by the band on the lash.
Put lash on!