Your cart
Close Alternative Icon
Purchase our Limited Edition Black Friday Box to Enter our Giveaway. Winners receive ONE FREE lash of your choice every month and one free liner every other month for a year! Purchase our Limited Edition Black Friday Box to Enter our Giveaway. Winners receive ONE FREE lash of your choice every month and one free liner every other month for a year!
IS HERE!
SHOP NOW, PAY LATER IN 4 EASY INSTALLMENTS ON ALL $35+ ORDERS.

USING OUR PRODUCTS

Check Out Our Quick Tutorial Videos




Check Out Our Written Instructions 

Apply With Gel Magnetic Liner:

Step 1
Take out Opulence MD Beauty brush with both angled edge and finer Edge for more Precision. 
Step 2 
Use angled Edge and give the liner a little stir so that the consistency becomes creamy like. 
Step 3
Apply the first coat of liner from the inner eye to the outer eye or vice versa. There is no dry time with the gel magnetic liner.
Step 4
Apply a second coat similar to the first coat of gel magnetic liner. Keep the line really tight in towards the base of my lashes so that my magnetic lashes will have the best fit. 
Step 5
Apply coat number three
Step 6
If lashes have a strong attraction to the eyelid then you have enough coats of liner. If lashes do not have that immediate attraction, apply one more coat making it four coats of liner. 
Step 7
Take lash out of the case directly off the magnetic strip.
Step 8
Attach lashes so the shorter lashes are closest to the inner eye or nose. 
Step 9
Grab lashes by the hair so the magnets on the lash band are exposed.
Step 10
Flex lash band a little so it has a slight curvature similar to the eyelid
Step 11
Apply to eyelid. Lash and lash band should click right into place with the magnetic liner. 

Apply With Liquid Magnetic Liner:
Step 1
Take the brush out of the handle and take off any excess liquid liner.
Step 2
Apply the first coat of liquid liner. 
Step 3
Allow 30 to 45 seconds of dry time after the first coat. You'll notice a color change where it goes from an inky black to more of a matte black. 
Step 4
Apply the second coat of liquid liner. 
Step 5 
Allow 30 to 45 seconds of dry time after the second coat. You'll notice a color change where it goes from an inky black to more of a matte black. 
Step 6
Apply the third and final coat. 
Step 7
Gently take the lash off the magnetic strip in the case.
Step 8
Flex the lash band so that the curvature matches the curvature of the eyelid. 
Step 9
Hold the lash gently by the hairs on the lash. 
Step 10
Put lash on! 

    Removing Lashes From The Eye:
    Step 1
    Avoid pulling on the hairs of the Lash 
    Step 2
    Go towards the outer corner of the lash locating the lash band 
    Step 3
    Loosen the corner of the lash band
    Step 4
    Lift the lash by grabbing that first magnet pulling on the band 
    Step 5
    Remove the remainder of the Lash from the adhesion by pulling the eye lash band along the rest of the eye.

      How To Clean:
      Step 1
      Gently remove liner still adhered to magnets by scratching off with your fingernail then soaking a Q-Tip with SanitEyes lid sanitizer and rubbing over each magnet.
      Step 2
      Use the SanitEyes to clean the liner and other eye makeup off your eyelids.
      Step 3
      Store your lashes in their case for next use.

      Storing Lashes:
      Step 1
      After lashes have been taken off, use our sanitizer on your lashes. 
      Step 2
      Once sanitizer is on lashes, leave them in the case open for about an hour or two.
      Step 3
      Place lash into the case so that the magnets on the lash attach to the magnetic lining inside the case. 
      Step 4
      The storage container is more than a beautiful classy container it protects your lashes from getting wet, dusty, dirty and also from getting accidentally crushed so that you get the maximum lifetime out of your lashes. 

      If Your Lashes Are Not Sticking Check The Following:
      Do you have at least 3 coats of liner on?
      Have you cleaned the old liner off of each magnet?
      Have you repositioned the lashes more than once since applying your liner?
      Are you in a very humid environment?
      Do you have very oily eyelids?
      Have you tried lash stabilizers?

      How to Use Lash Stabilizers:
      Step 1
      Cut the stabilizers to your desired length.
      Step 2
      Place the stabilizer UNDER your top lashes immediately BELOW the magnet you want to stabilize (think sandwich).
      Step 3
      Adjust to your comfort.
      Step 4
      Clean the stabilizer magnet as you do the magnets on your full lashes.

      Cleaning Off Mascara (Optional):
      Step 1
      Your Opulence MD Beauty lashes will never need to be washed.
      Step 2
      If you wear mascara with your natural Lashes and eyelash extensions in order to get a better blend, you can simply use an empty mascara spoolie to comb through your lash to remove any residual mascara that may have been left.